Haridwar, Uttarakhand
Software company in Haridwar, building for businesses across Uttarakhand
Our office is in Kankhal, on the south side of Haridwar. We build custom software, GST billing and ERP systems, Android apps and AI integrations, and we run our own products — so you can come and see working software before you commission any.
Mon-Sat 09:30-18:30 IST. We reply to every enquiry within one working day.
Where we are
Kankhal, not an address somewhere in Haridwar
Kankhal is the quieter stretch south of the main town, past the ghats. If you know Haridwar at all, these are the points to steer by.
From Har Ki Pauri, Kankhal is a short drive downstream along the canal road — the direction the crowds are not going. Coming off the Haridwar railway station or the bus stand, it is an auto ride out of the station area rather than a walk; ask for Kankhal and then for Mahamaya Complex, which is the landmark locals use before the shop number.
From Jwalapur you are already on the right side of town and come across on the Kankhal road. From Shantikunj and the Rishikesh highway, Kankhal is the turn before you reach the bridge and the old town traffic, which is the route to take if you are driving yourself and would rather not sit in it.
Being a software company in Kankhal rather than one in a metro business park has a practical consequence: there is no reception, no visitor pass and no tenth floor. You come in, somebody who writes the code opens a laptop, and the meeting starts.
Parking is on the road outside. Call the sales line before you set out and we will keep the time free — the office is small enough that whoever you need to speak to is either here or not, and five minutes on the phone saves you finding out in person.
Full contact details and enquiry formWho we build for
The trades this belt actually runs on
Haridwar, Roorkee and Rudrapur carry a lot of manufacturing and the distribution that feeds off it, and Dehradun sits at the top of the same corridor. Two kinds of business in that belt keep arriving with the same two problems.
FMCG and general distributors
Beat-wise orders arrive as a phone call or a photograph, get written into a register at the office, and are typed into billing software a second time at night. Nobody can say what a party owes until somebody adds the register up.
Wholesalers and commission traders
Tally holds the accounts honestly and holds no stock. Godown quantities live in a separate Excel sheet that was last reconciled whenever someone had an afternoon free, so a shortage shows up at delivery rather than at billing.
Dairy and food suppliers
Short shelf life makes batch and expiry the whole job, and a return has to be traced to the lot it came from. Daily routes and daily collections mean the day has to close every day, not every month.
Auto-parts and hardware traders
Thousands of part numbers, rates that differ by party, and a counter that cannot wait while someone looks a price up. HSN codes and GST rates have to sit on the item, not in the biller's memory.
Private money lenders
Interest is worked out on paper, receipts are written in a book, and the borrower's balance is whatever the latest page says. When an agent collects in cash, there is no record of who took what until the evening count.
Credit co-operative societies
Members want a statement, the committee wants a monthly position, and the auditor wants both to agree. Rebuilding a borrower-wise ledger from collection sheets at year end is a week of work that should have been a report.
Chit and finance companies
Daily collection cycles, several agents on the road, and a cashbook that has to balance against the money actually brought in. The question is never what the rule is, it is who changed the figure.
Both problems have the same shape. The accounts are usually fine; it is everything around the accounts — stock in more than one godown, a salesman on a beat, a collection agent with cash in his pocket — that lives in a register, a spreadsheet or a phone call. That is the gap an ERP software company in Uttarakhand should be closing, and it is the gap LalaJi ERP and MicroByz were written for.
If your business is in Roorkee, Rudrapur or Dehradun rather than Haridwar itself, nothing here changes except the length of the drive. The same team takes the call and does the work.
Why local matters
What being down the road actually buys you
Most software work can be done from anywhere, and we do plenty of it remotely. These are the parts where distance costs you something real.
A billing or collection system fails on details nobody writes in a requirement document: the scheme a particular party has been promised, the two counters that bill at the same time in the morning, the agent who cannot read English well. You find those by standing there, not by asking better questions on a call.
The same goes for the first week after go-live. Every migration has a morning where the invoice does not look like the invoice the clerk is used to, and in that hour the business will either use the new system or go back to the old one. Being able to send someone that morning is the difference, and it is the one argument for choosing an IT company in Haridwar over a cheaper quote from somewhere you have never been.
None of which means local is automatically better. Ask for the written scope, ask who owns the code at the end, and ask to see software they run themselves. We answer all three the same way wherever the client is: the scope is a document you read before the price is attached to it, and you own the code, the database and the deployment when it is done.
What a nearby client gets
- In-person scoping, so the first conversation happens where the work happens: at the counter, in the godown, beside the register.
- Onboarding on your own data, not on a demo company — your parties, your items, your opening balances, imported from Tally, BUSY or Excel.
- Training the person who will actually bill. The owner decides to buy the software; the billing clerk decides whether it is used.
- Someone in the room on go-live day, when the first real invoice of the morning has to go out correctly.
- A face to call back. Haridwar, Roorkee, Rudrapur and Dehradun are all within a day's travel of the office, so a visit is a decision rather than a project.
What we build
Custom work, and products already running
The full service list and the stack we write in are on the services page. In short, there are three ways people start with us.
Something built for you
Custom software development across Uttarakhand and the rest of India: internal tools, customer portals, approval workflows, integrations, and the AI pieces that go inside them. Web development and mobile app development in Haridwar means the same thing it means anywhere — quoted per project after scoping, a scoped first version in six to ten weeks, and the code, database and deployment yours at the end.
LalaJi ERP
For distributors, wholesalers and brands: GST billing with e-invoice and e-way bill, stock across godowns with batch, expiry and HSN, POS at the counter, an offline-first field app for orders and collections, and an online store on the same inventory. It runs on web, Windows, macOS and Android, and imports your Tally or BUSY data.
MicroByz
For money lenders, credit co-operatives and small MFIs: loans with custom rates and automatic EMI, daily and monthly collection cycles, borrower-wise ledgers, agent collections the owner approves before they post, a daily cashbook and monthly P&L. It runs on web, Android and iOS. An NBFC that needs more than Pro + covers is quoted a custom solution.
Visit us
The office, the numbers and the hours
Walk in during office hours or call first. Both lines are answered by people here, not by a call centre.
Comprog Technology, Kankhal
Comprog Technology Private Limited Shop No-03 Hanuman, Gadi Mahamaya Complex, KankhalHaridwar, Uttarakhand 249408
India
- Sales
- +91 81940 09009
- Support and legal
- +91 89410 99099
- hello@comprogtech.com
- Opening hours
- Mon-Sat 09:30-18:30 IST
Questions
What people in Haridwar ask before they call
If yours is not here, the sales line will answer it in the time it takes to write an email.
Is there a software company in Haridwar that builds custom software?
Yes — Comprog Technology, in Kankhal. What being here changes is the start and the end of a project: we scope at your counter rather than over a call, we import your existing Tally or BUSY file with your data in front of us, and somebody is in the room on the morning you switch over. The writing of the software happens the same way it would anywhere.
Where exactly is your office in Haridwar?
Shop No-03 Hanuman, Gadi Mahamaya Complex, Kankhal, Haridwar, Uttarakhand 249408. Kankhal is on the southern side of Haridwar, a short drive from Har Ki Pauri and the railway station. Call +91 81940 09009 before coming and someone who works on the software will meet you.
Do you work with businesses in Roorkee, Dehradun and Rudrapur?
Yes. The distribution belt around Haridwar, Roorkee, Rudrapur and Dehradun is a good part of our product work, and being an hour or two away means we can come for scoping, onboarding or a go-live rather than doing all of it over a call.
Can you come to our office to set the software up?
For businesses in and around Haridwar, yes. We prefer to scope in person, and onboarding at your own counter with your own data works better than training over a screen share. For clients further away we work remotely and visit when a project genuinely needs it.
What does a software project cost in Haridwar?
The same as it would anywhere: scope decides the price, not the postcode. What being nearby changes is the cost of getting the scope wrong. A morning spent watching your billing counter usually removes more guesswork than a week of calls, and guesswork is the expensive part of any quote.
Can we see the software running before we commit to anything?
Yes. Come to the office in Kankhal, or we will come to you if you are in Haridwar, Roorkee or Rudrapur, and run LalaJi ERP or MicroByz on real data instead of showing slides. Ring +91 81940 09009 first so that somebody who works on the software is free when you arrive.